Universal scalability for Snap Server 520, 620, 550, 4500, 18000,
650, 720i, 730i and 750i
The Adaptec SANbloc S50 JBOD is the simplest way to integrate the
performance, reliability, and cost-effectiveness of Serial Attached SCSI (SAS)
into your storage strategy. Whether you are creating or scaling your storage
solution, the Adaptec S50 enables you to scale to multiple terabytes of data
capacity. Use low-cost Serial ATA (SATA) or high-performance SAS drives to
achieve the right balance of performance and cost.
The SANbloc S50 is perfect for data- and transaction-intensive applications.
Dual SAS host connections transfer terabytes of data at speeds up to 1200MB/s
each, for an aggregate bandwidth of 2400MB/s..
- 2400MB/s bandwidth in a redundant system
- Choose SAS or SATA drives to balance performance, reliability and cost
- Meet growing data demands with 12TB of SATA storage or 3.6TB of SAS storage
- Point-to-point connectivity isolates drive failures, increasing
reliability and performance
Technical Specifications
Customer Needs
High availability, exceptional scalability and superior performance for
high-bandwidth applications.
Benefits
Ability to use SAS and SATA drives to achieve the right performance,
reliability, and price.
Key Differentiators
Point-to-point connectivity isolates drive failures, increasing reliability, and
fault tolerance and improves performance.
Meet your growing data demands with your choice of 12TB of SATA storage or 3.6TB
of SAS storage
Maximum Capacity
SATA: Up to 12 drives (12TB) capacity per 2U enclosure
SAS: Up to 12 drives (3.6TB) capacity per 2U enclosure
Hot Swappable and Redundant Components
Two advanced power and cooling modules (APC)
Two independent AC power inlets
Up to 12 drives
No active components on data path
Disk Drive Interface
Twelve independent 300MB/s point-to-point connections to each SAS or
SATA disk drive
Disk Drives
Capacity: Up to 1TB
Rotational velocity: 7200 RPM, 10K RPM, 15K RPM
Interface: 3Gb SAS; 3Gb/1.5Gb SATA
Form factor: 3.5in. form factor, 1.0in. height
Supported drives: Only S50/Snap Server disk drives
Host Interface
One SAS I/O module supports two SAS connections
SAS connections can be used for host connections or as a combination of host
connection and expansion
Each SAS connection supports up to 1,200MB/s
Measured Performance
Up to 750MB/s (sustained reads)
I/O Module Features
Single controller
SAS and SATA support
Autonegotiate speeds
Inband and out-of-band management
SMP and SSP command/protocol support
Redundant cable support
Maximum SAS Cable Length
Up to 6m
Monitoring
Temperature, advanced power and cooling modules including fan speed control,
disk drives, and I/O module, as well as error rates and quality of service on
each PHY.
Failure Notification
SCSI enclosure services (SES-2) over I2C physical interface, LEDs, audible
alarms, FRU (field replaceable unit) revision and serial number reporting,
events reported to storage management software.
AC Power
Input voltage: Autoranging, 85-264 VAC
Input frequency: 47-63 Hz
Power factor correction: Per EN61000-3-2
Input current: 100-240 VAC @ 4-2.5 A
Output power: 491 W peak, 430 W average
Height
3.5 inches (89mm)
Width
17.6 inches (447mm)
Depth
19.5 inches (495.3mm)
Weight with Drives
60 lbs (27 kg) max
Warranty
2-year system warranty
Additional Information
Snap Server S50 JBOD Data sheet - CLICK HERE