Qualstar Q40 LTO-9 Ethernet Connected Tape Library Bundle - 3 Year Warranty

Qualstar Q40 LTO-9 Ethernet Connected Tape Library Bundle - 3 Year Warranty

What's Included in the Bundle

• Qualstar Q40 3U / 40-Slot Tape Library with 1 x IBM LTO-9 SAS Tape Drive Installed
• ATTO XstreamCORE 8100T SFP+ Ethernet to SAS Intelligent Bridge (P/N: XCET-8100-TS0)
• External SFF-8644 to SFF-8644 SAS Cable (2 Meter)
• 3-Year Warranty

The Qualstar Q40 Mid-range and Enterprise tape library is designed to be Simply Reliable, providing superior performance, reliability and scalability for short-term backup/disaster recovery and long-term archiving requirements. The Q40 system offers capacity scaling from 40 to 640 cartridge slots, and throughput scaling from one to 48 tape drives. The Q40 utilizes LTO-7, LTO-8 or LTO-9 tape drives, with each 3U high Q40 library module delivering up to 720 terabytes of storage capacity using LTO-9 tapes in native mode, or up to 1.8 petabytes using LTO-9 tapes in compressed mode. The Q40 base unit may be expanded with up to Fifteen additional expansion modules supporting creation of a single library system with as much as 28.8 petabytes (LTO-9 compressed) storage capacity in a single 48U rack. The Q40 uses a single robot to service all drives and media, maximizing cost effectiveness.

The operator control panel uses an intuitive GUI and incorporates wizards making the system easy to configure and use. The same functionality may also be accessed remotely via the browser-based remote management interface (RMI). This enables IT administrators to remotely configure, manage and diagnose the library from anywhere in the world via the Internet. The Q40 system is also easy to service and repair, with field replaceable tape drives, power supplies and controller board units.

Key Highlights:

• 40 to 640 cartridges (base + 15 expansion modules)
• 1 to 3 tape drives per module, up to 48 drives
• LTO-9 drives with SAS interface
• 4" monochrome display with button controls in base unit
• Simple expansion, no special alignment required
• Cartridge magazines slide out for bulk loading
• Remote management via Ethernet
• IPV6, SNMP with SSL & TLS
• Encryption capable
• Drive firmware update via remote management interface
• Library firmware update via remote management interface or via control panel and USB thumb drive

Data Sheets
Qualstar Q40 LTO-9 SAS  8644 Data Sheet pdf - Click here

Qualstar Q40 Install Guide and Operations Manual pdf - Click here

ATTO XstreamCORE 8100T Intelligent Bridge FAQ - Click here

ATTO XstreamCORE 8100T Intelligent Bridge Tech Specs - Click here

ATTO XstreamCORE 8100T Intelligent Bridge Getting Started Guide - Click here

Q40 Specifications