| | |
|
| |
| | |
|
|
| | |
|
Quantum Scalar i40 and i80 Tape Library Specifications
Capacity
| |
Scalar i40 |
Scalar i80 |
| Form Factor |
3U |
6U |
| Maximum number of tape drives |
2 half-height |
5 half-height |
| Number of magazines |
2 magazines
(20 slots each) |
4 magazines
(20 slots each) |
| Number of cartridge slots |
Base unit: 25
Fully licensed: 40 |
Base unit: 50
Fully licensed: 80 |
| Maximum native capacity |
25 slots: 156.25 TB
40 slots: 250 TB |
50 slots: 312.5 TB
80 slots: 500 TB |
| Number of I/E station slots |
0 or 5 |
0, 5, or 10 |
|
Environmental
| |
Operating |
Non-Operating |
Shipping and Storage |
| Altitude |
–500 to 10,000 ft
(–152 to 3,048 m) |
–500 to 10,000 ft
(–152 to 3,048 m) |
–500 to 10,000 ft
(–152 to 3,048 m) |
| Temperature |
50º to 95º F
(10º to 35º C) |
50º to 113º F
(10º to 45º C) |
–40º to 140º F
(–40º to 60º C) |
| Relative Humidity |
20 to 80%,
non-condensing |
10 to 90%,
non-condensing |
0 to 95%,
non-condensing |
|
Power
| |
Scalar i40 |
Scalar i80 |
| Line voltage |
100 – 240 VAC |
100 – 240 VAC* |
| Line frequency |
50 – 60 Hz |
50 – 60 Hz* |
| Rated AC Input Current |
100 Volt – 2.8 Amps
240 Volt – 1.4 Amps |
100 Volt – 5.0 Amps
240 Volt – 2.5 Amps |
| Typical Power Consumption |
100 watts |
200 watts |
| * A Scalar i80 library with dual power supplies will
have these requirement on both AC inputs to the library but will load
share the current draw equally between each supply and from each AC
connection. |
|
Physical
| Basic Library |
Scalar i40 |
Scalar i80 |
| Height |
5.2 in. (132 mm) |
10.4 in. (264 mm) |
| Width |
17.5 in. (445 mm) |
17.5 (445 mm) |
| Depth (from library front bezel to back of library; excludes drive
sleds)* |
31.2 in. (793 mm) |
31.2 in. (793 mm) |
| Weight (one power supply, no tape drives, and no tape cartridges
installed) |
34.9 lbs. (15.8kg) |
52.4 lbs. (23.8 kg) |
|
| Desktop Kit |
Scalar i40 |
Scalar i80 |
| Height |
5.3 in. (135.6 mm) |
10.6 in. (268.8 mm) |
| Width |
18.9 in. (480 mm) |
18.9 in. (480 mm) |
| Depth (from library front bezel to back of library; excludes drive
sleds)* |
31.2 in. (793 mm) |
31.2 in. (793 mm) |
| * Depths listed above exclude drive sleds. Drive sleds
will add up to 50 mm to the overall length of the library depending on
tape drive type (half-height, full-height, Fibre Channel, SAS).
Additionally, when planning space requirements, take into account
installed cables (particularly fibre-optic cable radius on Fibre Channel
tape drives). |
|
Supported Tape Drives
| Vendor |
Type |
Interface |
| HP |
LTO-4 |
Fibre Channel (4 Gb, LC connector)
SAS (3 Gb, SFF-8088 connector) |
| HP, IBM |
LTO-5 |
Fibre Channel (8 Gb, LC connector)
SAS (6 Gb, SFF-8088 connector) |
| HP, IBM |
LTO-6 |
Fibre Channel (8 Gb, LC connector)
SAS (6 Gb, SFF-8088 connector) |
|
| |
| | |
|
|
|