Quantum Veeam Tape Appliance, Scalar i3, 25 licensed slots, two IBM LTO-8 6Gb SAS Tape Drives Part# LSC33-CSF2-L8NA

Quantum Veeam Tape Appliance, Scalar i3, 25 licensed slots, two IBM LTO-8 6Gb SAS Tape Drives Part# LSC33-CSF2-L8NA

Introducing the World’s First and Only Converged Tape Appliance for Veeam

NOTE: equipment rack must support product depth of 36.4in (92.5cm)

Product bundle with one Scalar i3 library, 25 licensed slots, two IBM LTO-8 SAS tape drives and one SAS Veeam iBlade.

Just plug in the appliance, give it an IP address, then use the Veeam wizard to install a tape proxy server directly onto the appliance.

It’s all the great benefits of tape, now in the world’s first and only converged appliance—purpose-built for Veeam.

Includes 3U library control module with embedded Ethernet, partitioning capability, 25-slot capacity-on-demand license, 3U rackmount kit, two IBM LTO-8 HH SAS drives, one power supply, one 3ft (0.9m) C13-C14 and one 3ft (0.9m) L-5-15 power cords. Supports up to a maximum of 50 slots and three tape drives. Scalar i3 tape drives require a mini-SAS-HD 8644 connector on the SAS cable. Does not include an expansion module, SAS or Ethernet cables. Other types of power cords should be locally sourced. Media labels are not included. If initial configuration is larger than a single Control Module (more than 50 slots and more than three tape drives) is needed or customer wants a base system with a pre-installed expansion module to accommodate easier future expansion, order LSC33-BSJ0-001A plus the iBlade and drives. Future upgrades (after initial installation) support a maximum three expansion modules, 12 tape drives and 200 licensed slots per i3 library. Requires standard 19in (48.2cm) four-post rack that supports a minimum product depth of 36.4in (925mm) or has an external rack depth at least 42.13in (107.0cm) deep, such as APC AR3100. The iBlade runs Windows Server 2016. The Veeam Tape Server software must be provided by the customer. Two 10GbE copper ports with RJ-45 connections are provided for network connectivity, and one 12Gb SAS port supporting four tape drive links. Mini-SAS-HD 2.1 8644 connections are used for connecting up to four SAS LTO-6 and later drives. SAS and Ethernet cables are not included.